How to recreate OS RAID

Step 1: Access IPMI Web UI

Step 2: Open remote console

Step 3: Invoke controller bios menù

• Open the virtual keyboard for the console
  
• reboot the system and press ctrl+c you should see a message reporting the system is invoking  SAS configuration Utility
  
  

Step 4: Verify BIOS and Raid status

•  IR is the firmware version termination for the enable boot controller with the boot priority
  
• Position you self on the IR controller line and press enter to access it's menù
• In the menù the BIOS & OS option status is Enabled
  Remember to confirm you are working on IR controller
• Access the RAID Properties menù (press enter on your virtual keyboard)
  
  
• If the RAID settings are correct you'll find both SSD drives identified and the voice YES under RAID Disk
  
• From Manage Volume 
  
• If RAID is not configured you'll see:Select the first option to Create RAID 1 Volume
  
  
• Next screen should be similar to: 
  
  
• To enable RAID configuration use arrows to move in the RAID Disk column and press you space bar over the NO to make it a YES  
  finally, press C to create the RAID volume