This will upgrade any current hypervisors to the latest Syneto VMware ESXi 6.5. The update requires host to be rebooted.
Please ensure that you are using at least Syneto StorageOS 3.2.7 before running this upgrade procedure. Here are the steps:
Step 1. Clear old configuration for local.sh
echo "#!/bin/sh" > /etc/rc.local.d/local.sh echo "exit 0" >> /etc/rc.local.d/local.sh
Step 2. Browse to your deployment folder from local datastore: (Local datastore name may vary)
Step 3. Modify firewall rules:
esxcli network firewall ruleset set -e true -r httpClient
Step 4. Download latest version from our servers to local datastore:
wget -O esx-syneto-update.zip http://b26e8c3d695ed0fb0dee-bb969871c94ac78f108e561fc9f42b57.r19.cf5.rackcdn.com/SynetoOS/ESXi-Ugrade-Bundles/ESXi-6.5.0-20190104001-Syneto-v14.30.zip
Note: Please make sure that firewall/antivirus does not block/filter the connection.
Step 5. Modify software acceptance level:
esxcli software acceptance set --level=CommunitySupported
If you used this step-by-step guide in the past you might get an warning:
[AcceptanceConfigError] Unable to set acceptance level of community due to installed VIBs syneto_bootbank_syneto-hc-ui_esxi-22.214.171.124.22, syneto_bootbank_syneto-hc-startup_esxi-126.96.36.199.22, syneto_bootbank_syneto-hc-tools_esxi-188.8.131.52.22 having a lower acceptance level. Please refer to the log file for more details.
You can ignore this message and go to the next step.
Step 6. Update:
esxcli software vib install -f --no-sig-check -d /vmfs/volumes/datastore1/deployment/esx-syneto-update.zip
Step 7. Check the output installation for a successful installation:
Installation Result Message: The update completed successfully, but the system needs to be rebooted for the changes to be effective. Reboot Required: true
Step 8. Reboot:
Final step. Check version after reboot:
esxcli system version get
Output should be:
Product: VMware ESXi Version: 6.5.0 Build: Releasebuild-11925212 Update: 2 Patch: 79